This unique drill bit was developed to create a
curved hole from just below the carpet line up into the center of
the floor plate in the wall cavity. Avoid the messy and time
consuming alternative of removing the base board and chiseling out a
path through the wall and the wood floor plate. This tool provides a
clean, professional installation when you need to route wire or
cable from the floor level up into the wall. Great for slab
construction, concrete floors or under-carpet wire applications. The
unique function of this tool is a product of innovative and patented
design. The study powder coated steel frame directs the specialized
cable shaft paddle bit up along an arc into the wall cavity so that
you prevent drilling through the opposite wall surface.
Sizes:
The Base-Boar-Zit is now available in two sizes: the standard 5/16”
size and the larger 7/16” size to accommodate coax. Each size is
shipped as a kit that includes the cable bit with frame, a 10ft.
thin fish wire in storage case (to fish your wire or cable through
the curved hole) and hex wrench.
Installers Tips
Place the Base-Boar-Zit™ on a bare floor against the
base board.
Attach your drill and being high-speed drilling.
The flexible cable bit drills up in an arc creating a
curved hole up through the bottom plate and quickly create access
from below the carpet line up into the wall.
Quick
Help
