The Rebore-Zit drill bit is the only
drill bit designed to enlarge a previously drilled hole while
retaining the existing wire in that hole. The bit is fabricated with
a custom made, hollow bodied drill bit containing a free spinning,
swivel eyelet mounted to its pilot hole center shaft. Just secure
your existing wire onto the eyelet and re-drill your hole to a
larger size. The bit will not twist the wire. Available in 3/8,
1/2, 3/4, 1 (final size of re-drilled hole) diameters. Each
diameter has an associated pilot hole size. The 3/8" ReBore-Zit has
a 1/4" pilot size. The 1/2" ReBore-Zit has a 3/8" pilot size. And
the 3/4" ReBore-Zit has a 3/8" pilot size. Use the appropriate
Rebore-Zit bit to accommodate the pre-existing hole (pilot hole) and
step-up in Rebore-Zit sizes until you obtain your desired final hole
size.
The attached wire will stay stationary when redrilling the hole.
Enlarge existing holes...
...without damaging or losing existing wires.
Description
Manufacture
Part #
3/8" ReBore-Zit
with 1/4" Pilot Drill Bit
Labor Saving Devices
LSD-62-338
1/2" ReBore-Zit
with 3/8" Pilot Drill Bit
Labor Saving Devices
LSD-62-348
3/4" ReBore-Zit
with 3/8" Pilot Drill Bit
Labor Saving Devices
LSD-62-368
Replacement
1/4" ReBore-Zit Pilot Drill Bit
Labor Saving Devices
LSD-62-000
Replacement
3/8" ReBore-Zit Pilot Drill Bit
Labor Saving Devices
LSD-62-005
Note: To
purchase any products made by Labor Saving Devices, you must purchase at
least $35.00 of their product. We are sorry for any inconvenience that
this may cause.
Quick
Help
