One of the Installers’ Most Valuable Tools!

Accept no inferior knock-off products - use the original - the Wet Noodle Retriever System. Labor Saving Devices, Inc. developed the ball chain and retriever concept to help save installation time. Since its introduction, it has evolved into a “must have” tool for retrofit installation. The Wet Noodle Retrieval System has been updated to now contain three components: a 24" flexible insulated retriever with an ultra strong earth magnet attached at one end; 10ft. of lightweight ball chain with a stop-ring; and an 18" telescoping pocket retriever. This system provides a fast and easy solution to connecting an in-wall entry point to an exit point blindly (without vision tools) to pull wire. This is a great product, and I highly recommend it.

Simply drop the ball chain with stop-ring attached through small hole from top of un-insulated wall. Let it slither to the bottom of the in-wall space by giving it a jiggle or two. Bend the flexible retriever into an "shape", feed it through a small hole at the bottom of the same wall (as shown in photo). Flip back and forth until magnet finds and attaches itself to ball chain. Slowly retrieve ball chain to just inside the bottom hole. Using pocket retriever partially extended, catch ball chain with hook end and bring through bottom hole. Attach your wire or cable and pull up. Because of its speed and efficiency the Wet Noodle and Retrieval System are a must for every wire and cable installers’ tool box.